Power requirements for Type 1
Additional Power Supply Information: Please check your power
supply board before ordering. If you have a stock power supply board, make sure the +12V and GROUND test point
loops are intact. See the image below for details. If the +12V or GROUND loops are broken off, then you
will need to order our Data East / Sega Power Adaptor with your kit. If your game has an aftermarket power
supply board (Rottendog, Pinscore, etc..) you will also need to order the power adaptor with your kit, as these
boards do not have test point loops.
Back to Type 1 Kits