SPIKE 2 LE: Additional install
instructions for certain games
On these SPIKE 2 LE games that have the larger 5 1/4" factory
Before removing the speaker plate, you will have to remove the speaker, spacers and foam gasket
that is under the speaker from the factory. You can then remount the speaker
directly on the speaker color ring (leaving off the gasket and 1/2" spacers) before you
remount the speaker plate, after the Speaker Light Kit frames are installed. This only needs to be
done on the right side (for space reasons), but it is recommended to do it on both sides to keep
each side looking the same. Otherwise, the install process is the same as the non-LE games that
have the standard 4" factory speakers.
Click HERE to choose the SPIKE 2 Speaker Light Kit type
(DELUXE or STANDARD) that you would like.
Choose Deluxe or Standard