The STANDARD Speaker Light Kits (TYPE 11) for SPIKE 2 system games get their +12v of power from the CN1 Cabinet Node Board that is located on the left side, in the front of the game cabinet (just inside the coin door). It is a printed circuit board that is just below the left flipper button area inside the cabinet.

  The connection on Cabinet Node 1 that is used is the CN9 connection. It is in the top left area of the CN1 board. The SAM to SPIKE 12v Power Harness that is included with the Type 11 kit is keyed so it can only be plugged in the proper direction on the CN9 connection. For more in-depth information on connecting the power for Type 11 kits, please see the "Power connection on SPIKE System games" .pdf in the MANUALS SECTION.

  If the CN9 connection is being used from the factory, that connector is only needed to be used if you are using a 12vdc dollar bill acceptor on your game. If you are not using a 12vdc dollar bill acceptor on your game, it is safe to unplug the factory connector and plug in the SAM to SPIKE 12v Power Harness and power cable for my Speaker Light Kit.

  If you are using a 12vdc dollar bill acceptor or the CN9 connection is being used by another aftermarket add-on, please let me know at support@speakerlightkits.com before you place your order and I can find an alternate location for the Speaker Light Kit to get its +12v of power from.